Data
Data: How to surf, rather than drown!
Introduction
Data on Disk
A Salutary Tale of Copying Files
We'll start by considering data stored on a disk drive. One thing that you might not know is that file systems and disk drives perform best when they are dealing with larger files. But how large is large? Here's a simple example, which you can try yourself:
First of all, let's get ourselves a large-ish file. A compressed tarball of the source code for the Linux kernel will do. In this case it's about 70MB in size. We can time how long it takes to create a copy of it. Below are the results of doing this experiment on BlueCrystal phase 2:
BCp2$ wget https://www.kernel.org/pub/linux/kernel/v3.x/testing/linux-3.10-rc7.tar.xz BCp2$ time cp linux-3.10-rc7.tar.xz linux-3.10-rc7.tar.xz.copy real 0m3.530s user 0m0.000s sys 0m0.068s
Now, that tar ball contains around 47,000 files, many of which are only a few hundred or thousand of bytes in size. These are files at the smaller end of the scale. Let's unpack the tarball and time how long it takes to copy these files, one-by-one:
BCp2$ tar --use-compress-program=xz -xf linux-3.10-rc7.tar.xz BCp2$ time cp -r linux-3.10-rc7 linux-3.10-rc7.copy real 18m17.102s user 0m0.214s sys 0m6.359s
Yikes! that took over 350 times longer than copying the single, large file. (These timings were taken at ~10:45 on the 25 Jun 2013. Any differences from the above values will be due to differences in load on the filesystem, which is shared with all the other users of the cluster. More of that in a moment..)
Now, we can repeat these tests on a different system. I got the values below from my very standard desktop machine:
desktop$ wget https://www.kernel.org/pub/linux/kernel/v3.x/testing/linux-3.10-rc7.tar.xz desktop$ time cp linux-3.10-rc7.tar.xz linux-3.10-rc7.tar.xz.copy real 0m0.192s user 0m0.000s sys 0m0.156s desktop$ tar --use-compress-program=xz -xf linux-3.10-rc7.tar.xz desktop$ time cp -r linux-3.10-rc7 linux-3.10-rc7.copy real 0m25.961s user 0m0.168s sys 0m2.360s
That's a lot quicker! However, copying the small files still took over 130 times longer than copying the large file. (Again, your mileage may vary.)
But hang on, I thought BlueCrystal was meant to be "super"?! Well it is. It's just that it's filesystem is servicing much more than just your file copying request.
Modern SATA disks have read and write bandwidths close to 100MB/s--for example, I just tested my Linux desktop machine with a handy, built-in utility (System > Administration > Disk utility) and recorded a read performance of ~75MB/s. We can compare this to the filesystem on BlueCrystal phase 2, where we see a peak of about 500MB/s throughput on the mixed workload of full, running cluster.
Another test below highlights a key difference between a parallel filesystem and that on a single disk. If I start several processes writing to the disk in my desktop machine, I see a rapid drop-off in performance as the number of processes increases. In contrast the parallel filesystem is able to support many processes with modest degradation to file writing performance.
| System | Clients x1 | Clients x4 | Clients x8 |
| Desktop | ~65MB/s | ~10MB/s | ~0.5MB/s |
| Parallel FS | ~160MB/s | 130MB/s | 67MB/s |
So what have we learned?
- You'll get better file access performance if you use larger rather than smaller files.
- If you are using BlueCrystal, you may want to consider using disks local to the compute nodes. These nodes are 300GB in size and are accessible via /local. If you do elect to use local disks:
- It is advisable to check the available space in /local as part of your job.
- Please do clean up /local after your job has finished
- when transferring data from node to node, please use the suffix .data.cluster when referring to a node, e.g. scp u04n037.data.cluster:/local/mydata $HOME.
Additionally (and not demonstrated above):
- Make use of minimal seek operations, which implies
- Make use of contiguous access patterns, rather than random ones.
Data over the Network
Filling the pipe.
We can think of networks as pipelines for data.
Unless we fill the pipeline we won't achieve it's throughput capacity.
Data when Writing your own Code
Locality of Reference: http://en.wikipedia.org/wiki/Locality_of_reference
Temporal locality: We expect to re-use of data already seen. Spatial locality: We expect to access data stored close to data that we've already seen.
Computer hardware is optimised to exploit these principles. We will get the most from our hardware if we design software accordingly.
Memory Hierarchy
| L1 Cache | Picking up a book off your desk (~3s) |
| L2 Cache | Getting up and getting a book off a shelf (~15s) |
| Main Memory | Walking down the corridor to another room (several minutes) |
| Disk | Walking the coastline of Britain (about a year) |
Files & File Formats
Data Analytics
Some common operations you may want to perform on your data:
- Cleaning
- Filtering
- Calculating summary statics (means, medians, variances)
- Creating plots & graphics
- Tests of statistical significance
- Sorting and searching
Selecting the right tools.
Databases
SQLite
A very popular relational database. Lightweight as it is unmanaged and so has very simple access controls. However does support SQL. The command line interface is widely available. For example, it is installed on BlueCrystal.
sqlite3 test.db
sqlite> .mode column
sqlite> .headers on
sqlite> CREATE TABLE planets(Id INT, Name TEXT, Diameter REAL, Mass REAL, Orbital_Period REAL);
sqlite> INSERT INTO planets VALUES(1,'Mercury',0.382,0.06,0.24);
sqlite> INSERT INTO planets VALUES(2,'Venus',0.949,0.82,0.72);
sqlite> INSERT INTO planets VALUES(3,'Earth',1.0,1.0,1.0);
sqlite> INSERT INTO planets VALUES(4,'Mars',0.532,0.11,1.52);
sqlite> INSERT INTO planets VALUES(5,'Jupiter',11.209,317.8,5.20);
sqlite> INSERT INTO planets VALUES(6,'Saturn',9.449,95.2,9.54);
sqlite> INSERT INTO planets VALUES(7,'Uranus',4.007,14.6,19.22);
sqlite> INSERT INTO planets VALUES(8,'Neptune',3.883,17.2,30.06);
sqlite> SELECT * FROM planets;
Id Name Diameter Mass Orbital_Period
---------- ---------- ---------- ---------- --------------
1 Mercury 0.382 0.06 0.24
2 Venus 0.949 0.82 0.72
3 Earth 1.0 1.0 1.0
4 Mars 0.532 0.11 1.52
5 Jupiter 11.209 317.8 5.2
6 Saturn 9.449 95.2 9.54
7 Uranus 4.007 14.6 19.22
8 Neptune 3.883 17.2 30.06
sqlite> SELECT * FROM planets WHERE Mass >= 1.0;
Id Name Diameter Mass Orbital_Period
---------- ---------- ---------- ---------- --------------
3 Earth 1.0 1.0 1.0
5 Jupiter 11.209 317.8 5.2
6 Saturn 9.449 95.2 9.54
7 Uranus 4.007 14.6 19.22
8 Neptune 3.883 17.2 30.06If you would like to export to, e.g., a CSV file (this is useful for subsequent import into, e.g., R):
sqlite> .mode csv
sqlite> .output planets.csv
sqlite> SELECT * FROM planets WHERE Mass >= 1.0;Where the contents of the file planets.csv is:
Id,Name,Diameter,Mass,Orbital 3,Earth,1.0,1.0,1.0 5,Jupiter,11.209,317.8,5.2 6,Saturn,9.449,95.2,9.54 7,Uranus,4.007,14.6,19.22 8,Neptune,3.883,17.2,30.06
sqlite> .exitto leave the interactive sqlite3 shell.
It is perfectly possible to access a database from inside a program--SQLite was really designed with that in mind. For example, you can learn more about accessing an SQLite database from inside a python script at:
More information about SQLite and other interfaces for access is at:
- SQLite: e.g. http://zetcode.com/db/sqlite/
MySQL
UoB Data Haven
GUI. Accessing from a program or script. Enterprise Grade The data haven.
GUI Tools
Numerical Packages
Such as R, MATLAB & Python.
Bespoke Applications
Rolling Your Own
Principles: Sort & binary search.
Tools: Languages, libraries and packages.
When Data gets Big
Quotas.
Local Disks.
Swapping.
Data the Google way - Map-Reduce.
Hadoop & Friends.
Summary
- Use large files whenever possible.
- Disks are poor at servicing a large number of seek requests.
- Check that you're making best use of a computer's memory hierarchy, i.e.:
- Think about locality of reference.
- Go to main memory as infrequently as possible.
- Go to disk as infrequently as possible as possible.
- Check that your are still using the right tools if your data grows.