Difference between revisions of "Debugging"

From SourceWiki
Jump to navigation Jump to search
Line 205: Line 205:
 
** array-bounds: '''-fbounds-check'''
 
** array-bounds: '''-fbounds-check'''
 
** floating point exceptions: '''-ffpe-trap=underflow,overflow,zero'''
 
** floating point exceptions: '''-ffpe-trap=underflow,overflow,zero'''
 +
** 'saving' local variables: '''-fno-automatic'''
 
* '''g95''':
 
* '''g95''':
 
** selected warnings: '''-Wuninitialized, -Wprecision-loss'''
 
** selected warnings: '''-Wuninitialized, -Wprecision-loss'''
Line 214: Line 215:
 
*** '''export G95_FPU_OVERFLOW=t'''
 
*** '''export G95_FPU_OVERFLOW=t'''
 
*** '''export G95_FPU_INVALID=t'''
 
*** '''export G95_FPU_INVALID=t'''
 +
** 'saving' local variables: '''-fstatic'''
 
* '''SunStudio12 f90''':
 
* '''SunStudio12 f90''':
 
** array-bounds: '''-C'''
 
** array-bounds: '''-C'''
Line 219: Line 221:
 
* '''pgf90''':
 
* '''pgf90''':
 
** array-bounds: '''-Mbounds'''
 
** array-bounds: '''-Mbounds'''
 +
** 'saving' local variables: '''-Msave'''
 
* '''ifort''':
 
* '''ifort''':
 
** stack-trace reporting: '''-traceback'''
 
** stack-trace reporting: '''-traceback'''

Revision as of 14:34, 9 June 2008

Debugging you program: Various techniques

Introduction

roll call: Tim, Emma, Jenny, Rupert, Mark, Tamsin, Vicky, Johnny, Ron, Lauren

Humans can be ingenious, inspired, careful, persistent and many things besides. All of these character traits can be called upon when writing software. There is one aspect of human nature we can be certain of, however: We err. We make mistakes; break stuff; generally muck it up. No amount of technology or gizmos will change this. From time-to-time, we all get it wrong.

This isn't all bad, however. It's a cliche, but if we never made a mistake, how would be learn? Making mistakes is essential for progress. That said, we also need our programs to function correctly, or indeed work at all. We want our weather and climate models to accurately predict the future. We don't want our banking software to 'lose' our money. Computers are more and more forming the cogs of our daily lives, and we want them to do the job.

OK, enough of the philosophy. Since that we're going to get bugs which we don't want, this workshop is focussed upon finding them and correcting them--the art of debugging. Approached hurriedly or unprepared, debugging can be a torrid and despairing affair. With some good tools and an informed approach, however, debugging can be a rewarding task. As we alluded to earlier, debugging is a learning process and as you grapple with your own projects, you will have a great many of those, "aha!" and "oh, I see!" moments. Not quite a joy, perhaps, but definitely satisfying.

Getting the content for the practical

OK, let's make a start. Login to your favourite linux box and type:

svn export http://source.ggy.bris.ac.uk/subversion-open/debugging/trunk ./debugging

A Common Bug: going beyond the boundaries of an array

We will start with a pretty common coding problem: we have an array and a loop which access elements of that array in turn. The problem is that we've made a mistake with our loop and it tries to access elements beyond the boundaries of our array.

Let's visit our example:

cd debugging/examples/example1

Here's the saliant parts of the code, from array_bounds.f90:

  integer, parameter :: n = 10  ! array size
  integer            :: ii      ! counter
  real, dimension(n) :: x       ! array
  ! a loop accessing beyond the array bounds
  do ii = 1, 10000
    x(ii) = x(ii) + float(ii)
    write (*,*) "x(",ii,") is: ", x(ii)
  end do

Let's take a look and compile up the code using the open-source g95 compiler.

We get a segmentation fault as soon as we step outside of the array. "Fine, this is how it should be", you say. Well, somethimes were not so lucky. I tried compiling-up the same code using both the Intel and PGI Fortran compilers. We wern't so lucky. With Intel, the counter reached 44 before the program crashed. With PGI, we needed to step outside the array by thousands of elements before we triggered a segmentation fault.

Happily we can check for array bounds problems in a less ad hoc manner. Many compilers allow you to incorporate run-time array-bounds checks into your executable. Using g95, this is done by supplying the flag -fbounds-check (-CB for Intel, or -Mbounds for PGI). When we run the program now, we get a much more definitive statement from the compiler (and Intel and PGI don't wait until we're way passed the end of the array either):

Fortran runtime error: Array element out of bounds: 11 in (1:10), dim=1

So, by testing our code with the appropriate compiler flags, we can track down occurances of this common problem. See the section below called compiler Flags Again for a list of useful flags for common Fortran ompilers.

Argument Mismatch

Another common bug is a mismatch between the number (or type) of arguments passed to a subroutine when it is called and those defined in the definition of the subroutine itself. Let's take a look at an example:

cd ../example2

In the file subroutines.f90, we have three subroutines. The calls and definitions for the first two match. However, the third is called in the main program using:

  call sub3(numDim)

but defined as:

subroutine sub3(numDim,arg2)

  implicit none

  ! args
  integer, intent(in)  :: numDim
  integer, intent(out) :: arg2

  arg2 = numDim

end subroutine sub3

Now, you may think this is an obvious mistake, and it is for a small number of arguments. However, for large progams the argument lists for subroutines can get quite large. Perhaps 10, 20 even 30 arguments. When we get up to those numbers, it's very hard to spot a mismatch.

Sadly for us, compilers such as Intel and PGI don't check that the calls and the definitions match by default--it's not the Fortran way! They would compile up the program happily, only for it to seg' fault at runtime (with PGI):

 We live in             3  dimensions
 Up, down, side to side, yup             3  dimensions it is!
Segmentation fault

Using the gfortran compiler, we get an even worse situation, the executable runs, doesn't run correctly and doesn't seg' fault:

 We live in            3  dimensions
 Up, down, side to side, yup            3  dimensions it is!

What a pain! Happily, there is a very simple fix to all this--we place our subroutines into a Fortran90 module. Let's take a look at what happens this time:

cd ../example3

We have an (almost) identical main program (the use statement is the only addition) and we have hived-off all our subroutines into mymod.f90. This time when we try to compile, with PGI, we get:

PGF90-S-0186-Argument missing for formal argument arg2 (subroutines.f90: 15)
  0 inform,   0 warnings,   1 severes, 0 fatal for argmismatch
make: *** [subroutines.o] Error 2

with Intel:

fortcom: Error: subroutines.f90, line 15: A non-optional actual argument must be present when invoking a procedure with an explicit interface.   [ARG2]
  call sub3(numDim)
-------^
compilation aborted for subroutines.f90 (code 1)

or with gfortran:

 In file subroutines.f90:15

  call sub3(numDim)
                  1
Error: Missing actual argument for argument 'arg2' at (1)

We still have an error. This is true. But we are told exactly what and where it is and also before we've wasted a load of time trying to run the faulty program.

Enable All Warnings

It pays to get all the information you can from your compiler. By default, your compiler will stop with and error if it finds some code which is clearly wrong. It may also produce some warnings as it works through your code. These don't stop the compilation but do highlight questionable code. Not all warnings are output by defualt. Using gfortran, for example, we can request that we are warned of all the grey areas in our code, using -Wall (which stands for Warn all). Eliminating warnings is a great step towards eliminating bugs.

Other compilers:

  • ifort: -warn all
  • g95: -Wall
  • SunStudio12 f90: (-w1) errors and warnings by default, -w4 for additional cautions, notes & comments
  • pgf90: -Minform=inform will expand the range of warnings given over the default (-Minform=warn)

If you can't stomach all the warnings, there is a useful subset in section below Debugging#Compiler_flags_again.

Looking a bit Closer

So far, we've looked at some bugs with severe effects--they caused the program to crash. If we have a bug, in a way we hope it's one with severe effects. That way at least they will be easy to spot! So far these severe problems have been easy to track down too. Alas, bugs are often more subtle and are accordingly harder to find. Don't despair, however, as we have more tools and aids to help us find the pernicious little critters.

An oft seen appraoch is to add print statements to the code, perhaps printing the value of a variable or merely proclaiming, "the program got as far as me!" Then recompile and rerun the program. Perhaps we get some insight or not on this time around, add some more print statements, recompile, rerun and hopefully home-in on the problem. This approach can certainly work, but is tedious and time consuming. Happily there is a better way. We can run our code inside a tool specifically designed to help us find bugs--we can use a debugger.

A very serviceable open-source debugger available on most linux systems is called ddd. We will use this one for this practical. There are a number of other good debugging tools, such as MS VisualStudio, the Portland Group debugger (available on quest) and many more besides. They all work in a similar manner, however, and so becoming familiar with ddd will keep you in good stead.

OK, let's move to a new example:

cd ../example4

We can compile up our program using make, note, however, the addition of the -g flag to the (g95) compiler, which instruments the code for dubugging:

[ggdagw@dylan example4]$ make
g95 -g -c gubbins.f90 -o gubbins.o
g95 -g gubbins.o -o gubbins.exe

Now, the sorrowful program in gubbins.f90 is full of programming problems:

  • integer division
  • overflow
  • underflow
  • divide by zero

The program will typically run silently to completion (although see the section called Compiler Flags Again below for examples of when this is not the case) and we may be none the wiser about any of the mishaps along the way. However, if we run the program inside the debugger, we can examine the values of all the variables and control the flow of the program as we see fit, exposing all those little mistakes to the cold light of day:

ddd gubbins.exe

The first thing we do is to set a breakpoint. When we run the program, it will get as far as the line of code with the breakpoint attached, and will then sit and wait for our next command. We can step the program one line at a time. This will step-into subroutine calls. Use next to step the program, but step-over subroutine calls. We can continue to the next breakpoint (or the end of the program if we haven't set one) and also display the values of variables as we go along. You can also hover over variables to see their values. This is all rather neat, eh?!

Inspecting the flow of loops and conditionals and the values of variables inside a program like this is ideal for finding bugs, and it's a lot less laborious than a tedious cycle of add print statement, recompile, rerun...

Defensive Programming

Note that accidentally modifying an argument passed to a subroutine is another common source of problems. The best way to address this one is an example of defensive programming, whereby we proactively avoid bugs through mindful programming practices. Fortran provides us with the intent attribute for dummy variables to address this. Trying to modify a dummy variable with the intent(in) attribute will result in a compile-time error. Adding intent to your arguments also helps you think clearly about the design of your subroutine.

Compiler flags again

Although running you program through a debugger is the most comprehensive way of examining problems, compiler flags an come to our aid again for some special cases.

You an try, for example, compiling gubbins.exe from example4 again using the various floating point exception flags from below:

  • gfortran:
    • selected warnings: -Wuninitialized
    • array-bounds: -fbounds-check
    • floating point exceptions: -ffpe-trap=underflow,overflow,zero
    • 'saving' local variables: -fno-automatic
  • g95:
    • selected warnings: -Wuninitialized, -Wprecision-loss
    • stack-trace reporting: -ftrace=full
    • array-bounds: -fbounds-check
    • floating point exceptions: set one or more of the environment variables (export VAR=VAL in BASH):
      • export G95_FPU_ZERODIV=t
      • export G95_FPU_UNDERFLOW=t
      • export G95_FPU_OVERFLOW=t
      • export G95_FPU_INVALID=t
    • 'saving' local variables: -fstatic
  • SunStudio12 f90:
    • array-bounds: -C
    • floating point exceptions: -ftrap=common (this is on by default)
  • pgf90:
    • array-bounds: -Mbounds
    • 'saving' local variables: -Msave
  • ifort:
    • stack-trace reporting: -traceback
    • array-bounds: -CB
    • floating point exceptions: -fpe0 -fpstkchk


There are a wealth of useful options in the manual pages!

Testing

In the previous sections we've looked at a number of ways of finding a bug once we know we have a problem. The fix for a bug is usually self-evident, and part of the "aha!" moment. However, in order to determine whether or not we are harbouring a bug, or more accurately, whether it is manifest under the range of conditions in which we run our program, we need to test it. This may seem blindingly obvious, but it is sobering to see the number of programs that are used without a second thought given to testing whether it actually does what it is intended to do!

There are few generalities that we can list with regard to testing--different codes are likely to be have rather different needs. However, I can would stress that it is a good idea to make it as easy as possible to test your code. Frequent testing is the key to finding bugs quickly and those that are found in a timely manner and far easier to find and fix (1).

It is possible to add a test rule to a makefile that you use to compile your code. Given such a rule and some appropriate scripts, it can be as simple as typing make test to test your code. Easy for you. Easy for your collaborators. Easier to find and fix the bugs. To find out more about make and the addition of a test rule, take a look at our course on make.

To go further

The Pragmatic Programming continues with a pratical about using version control with subversion at the command line: subversion.

References

  1. Kaner, Cem; James Bach, Bret Pettichord (2001). Lessons Learned in Software Testing: A Context-Driven Approach. Wiley, 4. ISBN 0-471-08112-4.

Appendix A

Segmentation Faults and Operating System Limits

If you get a Segmentation fault error without any further information, despite requesting stack trace information etc., this could be due to hitting an operating system limit regarding the amount of memory your program can allocate. Assuming you are using Linux, try using the ulimit -a command. If you are using large large, statically allocated arrays, you could try increasing the stack size, using the ulimit -s command. (The stack size limit exists to guard against runaway recusive processes.)