Difference between revisions of "Fortran1"

From SourceWiki
Jump to navigation Jump to search
Line 561: Line 561:
 
Now that you are getting familiar with Fortran, go a bit further by reading [[Fortran2]].
 
Now that you are getting familiar with Fortran, go a bit further by reading [[Fortran2]].
  
We recommend using the most up to date Fortran books, e.g.
+
We recommend using the most up to date Fortran books, e.g:
 +
 
 +
Walter S. Brainerd, '''Guide to Fortran 2008 programming''', Springer, 2015.
 +
 
 +
Ian Chivers, Jane Sleightholme, '''Introduction to programming with Fortran : with coverage of Fortran 90, 95, 2003, 2008 and 77''',
 +
Springer, Third edition, 2015.
  
 
Arjen Markus, '''Modern Fortran in Practice''', Cambridge, 2012.
 
Arjen Markus, '''Modern Fortran in Practice''', Cambridge, 2012.
 +
 
Norman S. Clerman, Walter Spector, '''Modern Fortran: Style and Usage''', Cambridge, 2012.
 
Norman S. Clerman, Walter Spector, '''Modern Fortran: Style and Usage''', Cambridge, 2012.
 +
 
Michael Metcalf, John Reid and Malcolm Cohen, '''Modern Fortran explained''', Oxford, 7th ed., 2011.
 
Michael Metcalf, John Reid and Malcolm Cohen, '''Modern Fortran explained''', Oxford, 7th ed., 2011.
  
 
Take a look at the [[A_Good_Read|'A Good Read?']] page for more details.
 
Take a look at the [[A_Good_Read|'A Good Read?']] page for more details.

Revision as of 11:42, 13 November 2017

Fortran1: The Basics

Getting the content for the practical

The examples are available via svn:

svn co https://svn.ggy.bris.ac.uk/subversion-open/fortran1/trunk fortran1

We'll use GCC and Intel Fortran compilers. You need to load these modules on phase 3:

module add languages/intel-compiler-16-u2 languages/gcc-7.1.0

hello, world

Without further ado, and in-keeping with the most venerable of traditions, let's meet our first example--"hello, world":

cd fortran1/examples/example1

You can compile the program by typing:

gfortran hello_world.f90 -o hello_world.exe

and run it by typing:

./hello_world.exe

Bingo! You've just compiled and run, perhaps your first, Fortran program. Hurrah! we're on our way:) Everybody whoop! Yeehah!

Enough of the magic, let's take a look inside the source code file. Take a look at the contents of hello_world.f90, using cat, less, more or your favourite text editor, and you'll see:

!
! This is a comment line.
! Below is a simple 'hello, world' program written in Fortran90.
! It illustrates creating a main 'program' unit together
! with good habits, such as using 'implicit none' and comments.
!
program hello_world
  implicit none
  write(*,*)  "hello, world"
end program hello_world

We have:

  1. some comment lines, giving us a helpful narrative
  2. the start of the main program unit
  3. the implicit none statement (more of that in the next section, but suffice to say, every well dressed Fortran program should have one)
  4. a write statement, printing our greeting to the screen
  5. and last, but not least, the end of the main program.

This is all pretty straight forward, right? Open-up your text editor and try changing the greeting, just for the heck of it. Retype make and re-run it. We'll adopt a similar strategy for all the other examples we'll meet. If you ever want to get back to the original version of a program, just type:

svn revert hello_world.f90

Although this has all been fairly painless, we have made a very significant step--we are now editing, compiling and running Fortran programs. All the rest is basically just details!:)

Containers and the Types of Things

As fun as "hello, world" was, let's spice things up a little. For instance, let's introduce some variables. We'll need to move to the next example:

cd ../example2

Fortran has several intrinsic, or built-in, types. Every variable must be give a type. Take a look in basic_types.f90:

  character         :: sex       ! a letter e.g. 'm' or 'f'
  character(len=12) :: name      ! a string
  logical           :: wed       ! married?
  integer           :: numBooks  ! must be a whole number
  real              :: height    ! e.g. 1.83 m (good include units in comment)
  complex           :: z         ! real and imaginary parts

This set of types suffice for a great many programs. The above are all single entities. We'll meet arrays of things in a couple of examples time. In Fortran2, we'll also meet user-defined types. These allow us to group instances of intrinsic types together forming new kinds of thing--new types. User-defined types are the bees knees and can make programs much easier to work with. We'll leave the details to that later course, however.

The above snippet shows some variable declarations, along with a helpful comments. It's good practice to comment your declarations, as a programmer new to your code (or even yourself in a couple of months time) can have a hard time figuring out what is supposed to be stored in such-and-such a variable. While we're on the topic, it's also good practice to give your variables meaningful names, even if they are long. Trust me, a bit more typing now, perhaps, but a lot less head-scratching later on over what is stored in the inspiringly named xbNew, or z2!

It's often a good idea to give variables an initial value when we declare them (working with uninitialised variables in another common source of bugs). This time we're looking at more_types.f90:

  character         :: nucleotide = 'A'            ! DNA has A,C,G & T
  character(len=50) :: infile = 'yourData.nc', outfile = "myData.nc"
  logical           :: initialised = .true.        ! or .false.
  real              :: solConst       = 1.37       ! Solar 'constant' in kW/m^2
  complex           :: sqrtMinusOne = (0.0,1.0)    ! (real,imag), sqrd gives (-1.0,0.0)

Fortran also allows us to gives variables certain attributes. For example, from pitfalls.f90:

  real,parameter    :: pi = 3.14159  ! a fixed constant
  real(kind=8)      :: totPrecip     ! this is preferred to 'double precision'

The parameter attribute tells you, me and Fortran that pi is a constant. It's fixed and it's a compile-time error if we try to change it. This is a good thing, since we can catch nasty bugs that can creep in that way. We never want pi to be anything other than pi, right?! Assigning parameter attributes to quantities we know are constant is an example of defensive programming, or bug avoidance!

By default reals in Fortran are represented using 4 bytes of memory. The addition of (kind=8) gives us an 8-byte real, often referred to a double precision real. Fortran does have a double precision type, but the kind attribute is preferred. (Many compilers also support the promotion of all default, 4-byte reals and integers in your program through flags, typically named -r8 and -i8, respectively.) 8-byte reals can be useful as accumulators, since they can help to avoid rounding errors.

The third program illustrates some arithmetic pitfalls--beware!:

  • integer division and it's truncation
  • casting as a solution to mismatched types
  • (integer) overflow
  • (real number) underflow

Let's have a play with the programs. You an compile them by typing:

make

and run them by typing, e.g.:

./basic_types.exe

or,

./more_types.exe

or,

./pitfalls.exe

Although we compiled our first example by-hand, we'll be using make to compile the rest of our example programs, so you won't have to worry about that side of things. (If you'd like to know more about make, you can take a look at our course on make, presented in a very similar style to this here excursion into Fortran.)

Now modify the program (remembering svn revert intrinsic_types.f90 if you make a mess). Try giving values to various types and also using operators such as:

  • arithmetic: +, -, /, ** (exponentiation)
  • functions: sin, cos, floor (rounding down)
  • logic: .and., .or., .not., .eqv., .neqv.
  • and you'll meet many more in the future..

For example:

  • Calculate the surface area of a sphere.
  • Is sine of pi divided by four really the same as one over root two?
  • What is the truth table of the NAND operator?

About that mysterious implicit none which we keep seeing at the start of our programs. Let me tell you a story: Once upon a time, the kings and queens of the garden of Fortran, being a generous and well meaning bunch, decided to save the programmers the bother of specifying the type of their variables. "Don't bother!", they said, "just be sure to give them appropriate names, and well sort out the rest." "Thank you. Thank you very much", said the programmers, and it was decreed that the names of integers should start with the letters i, j, k, l, m, or n, and the names of reals would start with the other letters. Anyhow, this all seemed like a great wheeze and everybody was very happy. This lasted for a while, but after time, the programmers got complacent and forgot how to name things and it all got rather messy. Integers became reals, reals became integers and before they knew it, the programmers had bugs all over the place! Boo. The kings and queens conferred on the matter and they realised that they had made a grave error in their gift of implicit typing. However, they couldn't undo what they had done. Instead, they had to persuade the programmers to give it up voluntarily. "Anything, anything!", they pleaded "to get rid of all these bugs!", and so it passed that every good programmer agreed to put implicit none at the top of every program they wrote, and they all lived happily ever after.

If, Do, Select and Other Ways to Control the Flow

Programs are like cooking recipes. We've covered the how much of this and how much of that part. However, we also need to cover the doing bit--do this and then do that, and for how long etc. This is generically termed control flow. Fortran gives us a fairly rich language with which to describe how we would like things done. Next example:

cd ../example3

Take a look inside control.f90. We have some variable declarations and then we encounter our first conditional:

  if (initialised .eqv. .true.) then
     write (*,*) "The variable 'area' is initialised and has the value:", area
  else
     write (*,*) "The variable 'area' is NOT initialised and has the value:", area
  end if

This is fairly self eplanatory--if..something is the case..then..else.. You can also have an elseif. In fact you can have as many of those as you like. You can also have as many statements inside each clause as you like. Talk about spoiled!

Select is another control structure:

  select case (nucleotide)
     case ('A')
        write (*,*) "nucleotide is Adenine"
     case ('G')
        write (*,*) "nucleotide is Guanine"
     case ('T')
        write (*,*) "nucleotide is Thymine"
     case ('C')
        write (*,*) "nucleotide is Cytosine"
     case default
        write (*,*) "default is the catch-all.  'Fall-through' can be a nasty bug."
        stop
     end select

This is a neat way of saying, "if..then..elsif..else.." The default clause at the bottom is important. Dropping this off can lead to fall-through, where none of the cases triggered. This is rarely what you want and can lead to nasty bugs.

Our first do loop is of the form:

  do ii=1,5
     write (*,*) "Do loop counter ii is:", ii
  end do

Again, this is fairly readable. ii is first given the value of 1, the body of the loop is evaluated and then we go back to the top again. Except this time we increment the counter (ii) by the default amount, which is 1. When we're at the top and we take ii past 5, we stop the loop and move on to the next statement passed the end do. You're allowed as many statements inside the loop as you like. Indeed, you're allowed more loops, conditions, loops in loops, just about anything you can think of! Beware, however, debugging a huge construct of nested this that and the other can be beyond the limits of human patience. Keep our programs simple and you will be happier for it.

The other loop examples show variations in the stopping condition and stride (i.e. how much we increment by), including counting backwards, and stopping before we've even started!

You'll notice that all the loops we've seen thus far will run for a pre-determined number of iterations. What if we don't know how many iterations we want ahead of time. Some languages, such as C for example, include a while loop for this purpose. In Fortran we still use do, but omit any start and end conditions. Note that we must include an exit condition, if we want such a loop to terminate:

  threshold = 0.5
  ii = 0
  do  
     random_value = rand()
     if (random_value .gt. threshold) then
        print*, 'counter is:', ii, random_value, '>', threshold, 'stopping.'
        exit
     end if
     print*, 'counter is:', ii, random_value, '<', threshold
     ii = ii+1
  end do

As before, compile it, run it and generally muck about. These are only a few of the control structures provided to us by Fortran. You'll find that you can do most things with these three, however.

Before leaving this example, let's consider if tests containing an equals and floating point numbers. Remember that there are an infinite set of real numbers and so a computer can only approximate them. For example, how would a computer represent 10/3? It has limited precision. It follows therefore that we should be careful when we need to test whether a real number is equal some value, such as 3.3 (see the last section of the program). A common way around this problem is to subtract the first real from second and to compare the absolute value of the result to some small threshold (to account for rounding errors).

  if ((abs(val-ref)) .lt. 0.0001) then
     ...
  end if

Exercises

  • Write a select statement which prints out the names of the digits in the set [1,10] in different languages. Write a loop to trigger each of these print statements.
  • Write a nested loop: Write a pair of nested do loops which count between 1 and 3. Print the values of the two counters in the inner-most loop. Think about where your 'end do's should go.
  • Write a nested if statement: For example, create character variables called 'vehicle', 'colour' and 'size'. We could represent a small red car as; vehicle = 'c', colour = 'r' and size = 's'. Arrange for your nested if to print 'eureka' given a big green train. Think about where your 'end if' statements should go.

Not one, Many!

That was fun. Back to thinking about variables for a moment:

cd ../example4

Last time we declared just one thing of a given type. Sometimes we're greedy! Sometimes we want more! To be fair, some things are naturally represented by a vector or a matrix. Think of values on a grid, solutions to linear systems, points in space, transformations such as scaling or rotation of vectors. For these sorts of things the kings and queens of Fortran gave us programmers arrays. Take a look inside static_array.f90:

  real, dimension(4)   :: tinyGrid = (/1.0, 2.0, 3.0, 4.0/)
  real, dimension(2,2) :: square = 0.0  ! 2 rows, 2 columns, init to all zeros
  real, dimension(3,2) :: rectangle     ! 3 rows, 2 columns, uninit

The syntax here reads, "we'll have an one-dimensional array (i.e. vector) of 4 reals called tinyGrid, please, and we'll set the initial values of the cells in that array to be 1.0, 2.0, 3.0 and 4.0, respectively.

For the second and third declarations, we're asking for two-dimensional arrays. One with two rows and two colums, called square, and one with three rows and two colums. We're calling that rectangle.

The program then goes on to print out the contents of tinyGrid.

If we want to access a single element of an array, we can do so by specifying it's indices:

  write (*,*) "square(1,2) is the top right corner:", square(1,2)

Fortran provides a couple of handy intrinsic routines for determining the size (how many cells in total) and the shape (number of dimensions and the extent of each dimension) of an array.

  write (*,*) "size(rectangle) gives total number of elements:", size(rectangle)
  write (*,*) "shape(rectangle) gives rank and extent:", shape(rectangle)

Fortran also allows us to reshape an array on-the-fly. Using this intrinsic, we can copy the values from tinyGrid into square. Neat.

  square = reshape(tinyGrid,(/2,2/))

Fortran also provides us with a rather rich set of operators (+, -, *, / etc.) for array-valued variables. Have a go at playing with these. If you know some linear algebra, you're going to have a great time with this example!

One thing to bear in mind when we consider 2D arrays is that Fortran stores them in memory as a 1D array and 'unwraps' them according to column-major order:

a 2D array 'unwrapped' into a 1D array using column-major order.


Exercises

  • Create 3x3 grid to store the outcome of a game of noughts-and-crosses (tic-tac-toe), populate it and print the grid to screen.
  • Fortran allows you to slice arrays. For example the second column of the 2d-array 'a' is a(:,2). Print the third row from the grid above.
  • Add two vectors together. Is this algebraically correct? What about adding two matrices?
  • Create two 2-d arrays. Populate one randomly and create another as a mask. Combine the two matrices and print the result.

The static malarky is because Fortran also allows us to say we want an array, but we don't know how big we want it to be yet. "We'll decide that at run-time", we programmers say. This can be handy if you're reading in some data, say a pay-roll, and you don't know how many employees you'll have from one year to the next. Fortran calls these allocatable arrays and we'll meet them in Fortran2.

If Things get Hectic, Outsource!

cd ../example5

Now, as we get more ambitious, the size of our program grows. Before long, it can get unwieldy. Also we may find that we repeat ourselves. We do the same thing twice, three times. Heck, many times! Now is the time to start breaking your program into chunks, re-using some from time-to-time, making it more manageable. Fortran gives us two routes to chunk-ification, functions and subroutines.

Let's deal with subroutines first. In procedures.f90, scroll down a bit and you can see:

subroutine mirror(len,inArray,outArray)

  implicit none

  ! dummy variables
  integer,                 intent(in)  :: len
  character,dimension(len),intent(in)  :: inArray
  character,dimension(len),intent(out) :: outArray

  ! local variables
  integer :: ii
  integer :: lucky = 3  ! notice scope of this identically named variable

  do ii=1,len
     outArray(len+1-ii) = inArray(ii)
  end do

  write (*,*) "'lucky' _inside_ subroutine is:", lucky

end subroutine mirror

Now, note that this is outside of the main program unit. (In principle, we could hive this off into another source code file, but we'll leave that discussion until Fortran2.) Notice also that we have a shiney implicit none resplendent at the top of the subroutine. Overall, it looks pretty similar to how a main program unit might look, but with the addition of arguments. Those fellows in the parentheses after the subroutine name. The declaration part also lists those arguments and we've commented that this are so-called dummy variables. We also see an attribute that we've not seen before, called intent. This is a very handy tool for defensive programming (remember aka bug avoidance). Using intent we can say that the integer len is an input and as such we're not going to try to change it. Likewise for the charcter array inArray. It would be a compile-error if we did. We also state that the character array outArray is an output and we're going to give it a new value come what may! We also have some variables that are local. Interestingly enough, one of our local variables, the integer called lucky, has exactly the same name as a variable in the main program unit. When we run the program, however, we will see that the two do not interfere with each other. This is down to their scope. The scope of lucky in the main program is all and only the main program unit and the scope of lucky in the subroutine is all and only the subroutine. We say that the main program unit and the subroutine units have different name spaces.

Well, we've seen a lot of new syntax and concepts in all that. Useful ones though. This program is small and artificial, so it's hard to see the benefits just yet. You will, however, as your programs grow. The subroutine is called from the main program , funnily enough by a call statement. Notice how the arguments passed to the subroutine in the call statement also have different names in the main program and the subroutine. That's scope again.

Functions similar yet different to subroutines. Notice that we don't call them in the same way. We still pass arguments, but the functions returns and value, and so we could place a function on the right-hand side (RHS) of an assignment. Typically we would write a function for a smaller body of work. We can potentially invoke it in a neater way from our main program, however.

Looking at the body of the function:

function isPrime(num)
  
  implicit none
  
  ! return and dummy variables
  logical             :: isPrime
  integer, intent(in) :: num

  select case (num)
     case (2,3,5,7,11,13,17,19,23,29)
        isPrime = .true.
     case default
        isPrime = .false.
     end select

end function isPrime

we can see that we have a declaration for a variable with the same name as the function. The type of this variable is the return type of the function. Indeed the value of this variable when we reach the bottom of the function is the value passed by to the calling routine. Note that we can call functions and subroutines from other functions and subroutines etc. in a nested fashion.

The last thing of note is the funky interface structure at the top of the main program:

  interface
     function isPrime(num)
       logical :: isPrime
       integer, intent(in) :: num
     end function isPrime
  end interface

Our function definition is outside of the main program and so is said to be external. The main program unit needs to know about it, however, and an interface structure is a good way to do this as it prompts Fortran to check that all the arguments match up between the call and the definition. It's the way to do it..for now. (We'll meet Fortran modules in Fortran2, which will give us a neater way to perform the same checks.)

Try running the program and writing some functions and subroutines of your own.

Exercises

  • Write a simple error handling subroutine that stops the program after printing a message, which is passed in as an argument.
  • Does the surface area of a circle increase linearly with an increase in radius? How about circumference? Write some functions and a loop to investigate.
  • What happens if you write a function which calls itself?

Input and output

OK, say we want some permenance? Perhaps we want to record the outputs of our program for some time, or we want to read the same values into a program each time that we run it. Storing data in files is the way to go.

File i/o

cd ../example6

In this example we'll see how to read and write data to and from files. The code for this example in contained in file_access.f90.

Before we can either read from- or write to- a file, we must first open it. Funnily enough, we can do this using the open statement, e.g.:

open(unit=19,file="output.txt",form='formatted',status='old',iostat=ios)
  • unit is a positive integer given to the file so that we can refer to it later. Several numbers are reserved, however, so we must avoid 5 (keyboard), 6 (screen), 101 (stdout) & 102 (punch card!).
  • file is a character string (can be 'literal') containing the name of the file to open.
  • form is the file format--'formatted' (text file) or 'unformatted' (binary file).
  • status specifies the behaviour if the file exists:
    1. old the file must exists
    2. new the file cannot exists prior to being opened
    3. replace the old file will be overwritten
  • iostat is a non-zero integer in case of an error, e.g. the file cannot be opened for instance.

When you have finished with a file, you must close it:

close(19)

Note that if you need to go back to the beginning of a file, you don't have to close it and open it again, you can rewind it:

rewind(19)

To write to a file, the syntax is, e.g.:

write(unit=19,fmt=*) array1, array2

where,

  • array1 & array2 are variables we wish to write to the file.
  • unit is the unit number of the file we want write to.
  • fmt is a format string. We have chosen '*', which gives us default settings. However, we can gain greater control by specifying in detail what we will be writing and how we would like it formatted. Take a look in the example file_access.f90 for examples.

Similarly, we use a read statement to extract data from a file, e.g.:

read(unit=19,fmt=*,iostat=ios) var1, var2

Note is that it is very important to use the iostat attribute to make sure that we handle any errors, and don't press on regardless into oblivion! e.g.:

  if (ios /= 0) then
     print*,'ERROR: could not open file'
     stop
  end if

Among other things, the program file_access.exe writes the same data to; (i) a text file; and (ii) a binary file:

  open(unit=56,file='output.txt',status='replace',iostat=ios,form='formatted')
  if (ios /= 0) then
     print*,'ERROR: could not open output.txt'
     stop
  end if

  open(unit=57,file='output.bin',status='replace',iostat=ios,form='unformatted')
  if (ios /= 0) then
     print*,'ERROR: could not open output.bin'
     stop
  end if

  ! write size1 and size2 to output files (and then compare sizes)
  write(57) array1
  write(57) array2
  close(57)

  write(56,*) array1
  write(56,*) array2
  close(56)

If you do a long listing('ls -l'), you'll see the size difference:

-rw-r--r-- 1 fred users 220032 Feb  8 11:01 output.bin
-rw-r--r-- 1 fred users 825002 Feb  8 11:01 output.txt

Using character strings as file names

cd ../example7

filename.f90 in example7 shows a little trick for people who output a lot of data and need to manipulate a lot of files. It is possible to use a write statement to output a number (or anything else) to a character string and to subsequently use that string as a filename to open, close and output to many files on the fly:

  character(len=8) :: filename
  integer          :: ii, ios

  ! define a format to write a filename
  10 format('output',i2.2)

  do ii=1,20
    write (unit=filename,fmt=10) ii
    open(20,file=filename,status='replace',form='formatted',iostat=ios)
    ...

Namelists

And all of a sudden, we're at our last example:

cd ../example8

In namelists.f90, we'll look at another approach to file input and output. Fortran provides a way of grouping variables together into a set, called a namelist, that are input or output from our program en masse. This is a common situation. For example, reading in the parameters into a model. The statement:

namelist /my_bundle/ numBooks,initialised,name,vec

sets it up.

Fortran further provides us with built-in mechanisms for reading or writing a namelist to- or from a file.

First, we must open the file of course:

  open(unit=56,file='input.nml',status='old',iostat=ios)
  if (ios /= 0) then
     print*,'ERROR: could not open namelist file'
     stop
  end if

Note that we made sure to tell Fortran that this is an old file, i.e. that it already exists, and to check the error code. I the case that the open operation failed, we've asked the program to halt with an error.

Now, assuming that we've opened the file OK, we proceed to read its contents. Fortran makes this rather easy for us, given that the information is contained in a namelist:

  read(UNIT=56,NML=my_bundle,IOSTAT=ios)
  if (ios /= 0) then
     print*,'ERROR: could not read example namelist'
     stop
  else
     close(56)
  end if

In the read statement, we told fortran that we wanted to read a namelist and that the group of variables should be flagged in the file as my_bundle. Again we've checked the error status and decided to halt with an error should the read statement fail for any reason. Take a look at the contents of input.nml. See that it is ascii text and that the variables (with their values) do not need to be listed in the same order in the file as they are in the program:

&my_bundle
numBooks=6
vec=1.0 2.0 3.0 4.0
initialised=.false.
name='romeo'
&end

The program procedes to print the values to screen, demonstrating that they have indeed come from the file, to assign new values to the variables and then to write the modified values to a new file, called modified.nml. Compare the two ascii text files. Try running the program a second time and you will receive an error, telling you that the output could not be written since a file called modified.nml exists and that we expressly stated that is was to be a new file. Delete modified.nml, try again and it will succeed. Try changing the namelist, values, filenames etc. Go for it, make a mess! You'll learn a lot from it:)

Exercises

  • Write some code to read in a colour (red, blue, green etc.) from a namelist and then print out the names of all the railway engines (thomas, percy, gordon etc.) that match.
  • Read in the dimensions of an ellipse from file and print out it's area.

To go further

The Pragmatic Programming course continues with Linux2, a look at some of the more advanced but very useful Linux concepts.

Now that you are getting familiar with Fortran, go a bit further by reading Fortran2.

We recommend using the most up to date Fortran books, e.g:

Walter S. Brainerd, Guide to Fortran 2008 programming, Springer, 2015.

Ian Chivers, Jane Sleightholme, Introduction to programming with Fortran : with coverage of Fortran 90, 95, 2003, 2008 and 77, Springer, Third edition, 2015.

Arjen Markus, Modern Fortran in Practice, Cambridge, 2012.

Norman S. Clerman, Walter Spector, Modern Fortran: Style and Usage, Cambridge, 2012.

Michael Metcalf, John Reid and Malcolm Cohen, Modern Fortran explained, Oxford, 7th ed., 2011.

Take a look at the 'A Good Read?' page for more details.