Difference between revisions of "Glam output"

From SourceWiki
Jump to navigation Jump to search
 
Line 7: Line 7:
 
The variables that are output can be selected by editing glam.out.  This file contains set two arrays (which2d and which3d).  Output for a particular variable is selected if the appropriate entry in the array is 1 (otherwise set to zero).  The variables currently available for output are shown in Tables 1 and 2.
 
The variables that are output can be selected by editing glam.out.  This file contains set two arrays (which2d and which3d).  Output for a particular variable is selected if the appropriate entry in the array is 1 (otherwise set to zero).  The variables currently available for output are shown in Tables 1 and 2.
  
Table 1.  3d variables available from GLAM.
+
{| border="1"
 
+
|+ Table 1.  3d variables available from GLAM.
Variable Grid Units MATLAB name
+
| || Variable || Grid || Units || MATLAB name
1 Horizontal velocity in x Staggered m yr-1 u
+
|-
2 Horizontal velocity in y Staggered m yr-1 v
+
| 1 || Horizontal velocity in x || Staggered || m yr-1 || u
3 Vertical velocity Normal m yr-1 w
+
|-
4 Vertical velocity of grid Normal m yr-1 wg
+
| 2||Horizontal velocity in y||Staggered||m yr-1||v
5 Glen’s A Normal Pa-3 yr-1 a
+
|-
6 Temperature Normal deg. C t
+
| 3||Vertical velocity Normal||m yr-1||w|
7 Effective viscosity Normal Pa s evs
+
|-
8 Effective stress Normal Pa tau
+
| 4||Vertical velocity of grid||Normal||m yr-1||wg
9 Vertical shear stress in x Normal Pa txz
+
|-
10 Vertical shear stress in y Normal Pa tyz
+
| 5||Glen’s A||NormalvPa-3 yr-1||a
11 Horizontal shear Normal Pa txy
+
|-
12 Longitudinal stress deviator in x Normal Pa txx
+
| 6||Temperature||Normal||deg. C||t
13 Longitudinal stress deviator in y Normal Pa tyy
+
|-
14 Gravitational driving stress in x Normal Pa gdx
+
| 7||Effective viscosity||Normal||Pa s||evs
15 Gravitational driving stress in y Normal Pa gdy
+
|-
Horizontal distances Both m xn yn xs ys
+
| 8||Effective stress||Normal||Pa||tau
Vertical distances Both m zn zs
+
|-
 +
| 9||Vertical shear stress in x||Normal||Pa||txz
 +
|-
 +
| 10||Vertical shear stress in y||Normal||Pa||tyz
 +
|-
 +
| 11||Horizontal shear||Normal||Pa||txy
 +
|-
 +
| 12||Longitudinal stress deviator in x||Normal||Pa||txx
 +
|-
 +
| 13||Longitudinal stress deviator in y||Normal||Pa||tyy
 +
|-
 +
| 14||Gravitational driving stress in x||Normal||Pa||gdx
 +
|-
 +
| 15||Gravitational driving stress in y||Normal||Pa||gdy
 +
|-
 +
| ||Horizontal distances||Both||m||vxn yn xs ys
 +
|-
 +
| ||Vertical distances||Both||m||zn zs
 +
|}
  
  

Revision as of 11:02, 27 July 2007

Output from GLAM

Selecting output from GLAM

GLAM outputs 2d and 3d variables in files glam.2df and glam.3df, respectively. These files are binary and can be read with MATLAB scripts (see below). The interval between output is selected using the variable nout within glam.nml. The three elements of this array contain intervals for point, 2d and 3d output (the first is no longer used). The unit is years. Note that GLAM will also at the first (tstr) and final (tstr+trun) time step irrespective of these settings; the actual time integration loop runs from tstr+tinc until trun is exceeded. The variable nstr can be used to control when output starts in a time-dependent simulation; output will only be written after nstr (in years). This is useful of we are only interested in the equilibrium.

The variables that are output can be selected by editing glam.out. This file contains set two arrays (which2d and which3d). Output for a particular variable is selected if the appropriate entry in the array is 1 (otherwise set to zero). The variables currently available for output are shown in Tables 1 and 2.

Table 1. 3d variables available from GLAM.
Variable Grid Units MATLAB name
1 Horizontal velocity in x Staggered m yr-1 u
2 Horizontal velocity in y Staggered m yr-1 v
3 Vertical velocity Normal m yr-1
4 Vertical velocity of grid Normal m yr-1 wg
5 Glen’s A NormalvPa-3 yr-1 a
6 Temperature Normal deg. C t
7 Effective viscosity Normal Pa s evs
8 Effective stress Normal Pa tau
9 Vertical shear stress in x Normal Pa txz
10 Vertical shear stress in y Normal Pa tyz
11 Horizontal shear Normal Pa txy
12 Longitudinal stress deviator in x Normal Pa txx
13 Longitudinal stress deviator in y Normal Pa tyy
14 Gravitational driving stress in x Normal Pa gdx
15 Gravitational driving stress in y Normal Pa gdy
Horizontal distances Both m vxn yn xs ys
Vertical distances Both m zn zs


Viewing output from GLAM in MATALB

The GLAM output files can be loaded using MATLAB scripts glam2d.m and glam3d.m. Both are called using [a] = glam3d(N,PATH); (where N is the time step of interest and PATH is the relative location of the output file, e.g. ‘.’ for same directory). These scripts create a MATLAB structure that can be referenced as follows. For 3d output, use a.NAME(I,J,K) where NAME is the variable’s MATLAB name (see Tables 1 and 2), I and J are horizontal indices and K the vertical index. Note that it is often necessary to compress the 3d array to a 2d array for potting purposes using squeeze(). The command imagesc(squeeze(a.txz(:,:,end))) will produce an image of basal traction.