StartingC

startingC: Learning the C Programming Language

Introduction

svn co http://source.ggy.bris.ac.uk/subversion-open/startingC/trunk ./startingC

A Quintessential First Program

OK, now that we have the example code, let's get cracking and run our first C program. First of all, move into the example directory:

cd startingC/examples/example1

We'll use of a Makefile for each example, so as to make the build process painless (hopefully!). All we need do is run make (see the [make tutorial about make] if you're interested in this further):

make

Now, we can run the classic program:

./hello.exe

and you should get the friendly response:

hello, world!

Bingo! We've just surmounted--in some ways--our hardest step; running our first C program. Given this quantum leap, everything else will be plain sailing from here, honest!

Types & Operations

Buoyed with confidence from our first example, let's march fearlessly onwards into the realm of variable types and basic operations. To do this, move up and over to the directory example2 and type make to build the example programs:

cd ../example2
make

Take a look inside types.c and after the start of the main function, you'll see a block of variable declarations:

  char   nucleotide;        /* A, C, G or T for our DNA */
  int    numPlanets;        /* eight in our solar system - poor old Pluto! */
  float  length;            /* e.g.  1.8288m, for a 6' snooker table */
  double accum;             /* an accumulator */

C, like many languages (e.g. Fortran), requires that variables must be declared to be of a certain type before they can be used, and here we see examples of four intrinsic types provided by the language. It's a very good habit to comment all your variable declarations, and here the comments pretty much explain what the various types are. double is a double precision--twice the storage space of a float--floating point number. The extra space make a double a good choice for an accumulator where you want to minimise rounding errors and avoid under- and overflow as best as possible. (The Fortran programmers amongst us will note, with a whince, the absence of an implicit type for complex numbers. Those reeling from this revelation will be comforted by the knowledge that C++ contains a complex class.)

Various types can be given further qualifiers, such as short, long, signed and unsigned:

  short int mini;           /* typically two bytes */ 
  long  int maxi;           /* typically eight bytes */ 
  signed char cSigned;      /* one byte, values in the range [-128:127] */
  unsigned char cUsigned;   /* values in the range [0:255] */

The const keyword is also very useful for, well, declaring constants. In invaluable intrinsic (aka built-in) function when pondering the amount of memory assigned to a variable is sizeof().

In addition to single entities of various types, we can also declare arrays of the self-same intrinsics. The syntax for this is along the lines of:

  char cStr[20];            /* a character array/string of 20 chars */
  int  iMat2d[3][3];        /* a 2-dimensional matrix of integers - 3x3 */

You'll see a good deal more of accessing the various elements of an array in later examples, but for now be satisfied with the knowledge that array indices start at 0 in C (yes, that's right Fortraners, that's zero, not 1) and that the syntax for array access is, e.g.:

cStr[0] = 'h';  /* first elememt set to ascii char code for 'h' */

Enumerated types can be a useful way to map (a list of) symbolic names to integer values.

Now that you've read it through, run the program and satisfy yourself that it all works as you expect it to.

---

Shifting our attention to operations.c, let's consider some basic operations that C supports. This is the start of the doing things part.

The first block of code here gives an arithmetic example--how to calculate the volume of an oblate spheroid that happens to be close to all our hearts, our shared home Earth:

val = (4.0/3.0) * pi * pow(equi_rad,2) * pol_rad;

I won't dwell on this as I'm confident that the syntax is self-explanatory, save to mention that the function pow comes from the built-in library of math functions.

Next up, you'll see the decrement and increment operators:

  --numPlanets;
  ++numPlanets;

also self-explanatory.

C provides the logic operators, == (is equal), != (not equal), && (AND) and || (OR); as well as the relationals, > (greater than), < (less than), >= (greater than or equal) and <= (less than or equal).

An operation that you will become keenly aware of--especially working in scientific computing--is the ability to temporarily convert the a variable from one type to another on-the-fly. This is known as casting. Two examples of this are:

  (short int) pi
  (float) 42

where, in the first, we convert pi into a (short) integer and convert 42 into a floating point number in the second. Note that the cast does not effect the original variable in any way. i.e. the value given to the variable called pi is not changed through using the cast.

One last class of operations for now are the bitwise operators. These give you very low-level control over the bytes associated with variables, should you need that. For example, we can perform a bitwise AND on the two bytes 01001000 and 10111000, yielding 00001000 when all the bit pairs are considered in turn according to the criteria:

INPUT		OUTPUT
A	B	A AND B
0	0	0
0	1	0
1	0	0
1	1	1

---

Now, it's very important that you muck around with these example programs as much as possible! Ideally, so much so that you break them! We never learn as much as when we make a mess of things, and since these are just toy programs, you may as well go for it! If you get in a pickle, you can get the original programs back with a quick waft of the Subversion wand:

svn revert *

Exercises

types.c

• declare a character array sufficient to record the state of a game of naughts and crosses, populate is and print it to the screen.
• How many bytes is used to store a long double?
• You can give an initial value to a character array when you declare it (e.g. char cStr[20] = "xxxxxxxxxxxxxxxxxxxx";). What happens if we leave '\0' out of character assignments in this case?

operations.c

• 29.2% of the Earth's surface is land. How much is this in square kilometers?
• Logic is perilous. Can you think of a time when we say "or", but really mean logical AND?
• What happens if you cast the character '9' to an int?

Conditionals & Loops

OK, we have types and operators under our belts. This C malarky isn't too bad, eh? Let's take a look at some stalwarts of the procedural family of languages--conditionals and loops. As we will start all our sections, move up and over to the example3 directory and build the program(s) therein:

cd ../example3
make

Looking inside flow.c, our first block shows how we can make many way decisions using if tests and the else catchall:

  if ( temperature < 0.0 ) {
    printf("Water would normally freeze at:\t%f\tdegrees C\n");
  }
  else if (temperature > 100.0 ) {
    printf("Water would normally boil at:\t%f\tdegrees C\n");
  }
  else {
    printf("The temperature must be in the range [0.0,100.0]\n");
  }

This is all very nice and self-explanatory. Typically you would use the above for a decision point that could follow one of 3 or less branches. If you have more than 3 branches, the switch statement is likely to be more concise and easier for you and your fellow developers to read:

  switch (iCount) {
  case 0:
    printf("case 0: nada, zip, nowt.\n");
    break;
  case 1:
    printf("case 1: uno, sole, unitary.\n");
    break;
...
  default:  /* a default protects against 'fall through' bugs */
    printf("default: mucho, many, lashings.\n");
    break;
  }

The default case is much like our else catch-all in the box above and is important to include as otherwise you will be vulnerable to a 'fall-through' bug. This is when none of the cases trigger because we did not consider the actual value passed to switch(). You will also notice the break statements in all the cases. Adding these is also a defensive maneouvre, since we could accidentally trigger two cases. Case 4 and the default, say.

---

Moving on. The for is an oft used tool on the work bench:

  for(ii=0; ii<iMax; ii++) {
    if (ii == 3) {
      printf("Surprise!\n");
      continue;  /* jumps to the start of the next iteration */
    }  
    printf("Yup, I'm in a for loop, whizz-oh.  Counter is:\t%d\n", ii);
  }

It's tidy, succinct and gets the job done.

while and for

break & continue

---

Exercises

The C Preprocessor

Up until now, we've been studiously ignoring the lines beginning with # at the start of our programs.

Arrays & Pointers

address, dereference address arith 2d arrays binary trees and linked lists - just give examples

Structures

DAB again

watch out for padding

Further Reading

The bible is The C Programming Language by Kernighan & Ritchie.