Phase space mode

In this mode the model explores the phase space of the various parameters that are being optimised. The parameter values set in Readoptimfile have boundary values within which parameter values may vary. The subroutine Space_survey runs the model over the range of possible parameter values. For each combination of parameter values a cost function is determined,

[math]\displaystyle{ C = \frac{1}{n_{i}}\sum_{i} \left|{M_{i}-m_{i}}\right|+\frac{1}{n_{j}}\sum_{j} \left|{M_{j}-m_{j}}\right|+\frac{1}{n_{k}}\sum_{k} \left|{M_{k}-m_{k}}\right|+... }[/math]

where, C is the cost function value, M is the measured value, m is the model predicted value, n is the normalisation constant, and the suffix i, j, k, refers to the different optimisation datasets.

The output from this mode of model run shows the surface of the phase space. In the example below, the response surface is shown for the parameters air temperature lapse rate (°C km^-1) and precipitation lapse rate (m m^-1day^-1). The colour of the surface corresponds to the cost function for each combination of temperature and precipitation lapse rates.